|
Extractor All Purpose Diamond Blade Specifications & Tips |
Specifications: Each EXTRACTOR™ blade is manufactured using new vacuum brazed diamond technology. High quality steel core is at the heart of all our blades additionally top grade industrial diamonds are used to insure the longest blade life.
The EXTRACTOR blades can be used on gas cut-off saws & chop saw
12, 14 and 16 inch diameter X .125 with variable size tap-out arbor fit 20mm or 1 inch.
Angle Grinder EXTRACTOR blades: 4, 4.5 and 7 inch diameter blades with a variable size tap-out arbor to fit most tool brands.
ALL NEW in 2010 Die-Grinder EXTRACTOR blades: 2 & 3 inch diameter blades with variable arbor that fit most tool brands.
The EXTRACTOR™ blade cuts these materials extremely fast:
- Auto Bodies
- Steel Guard Rails up to 5/8”
- Stainless Steel
- Ductile Iron Pipe
- Reinforced Concrete with Re-bar
- Cuts Hurricane Glass, Security Glass & Fiberglass
- PVC
- Aluminum
- Copper
|
- Brass
- Roof Materials
- Cinder Block
- Hard Brick
- Roofing Tile
- Floor Tile
- 3/4" Plywood
- 2”x 4” Wood
- And, more......
|
Note: The Roof Ripper Blade is the best for cutting tires and railroad ties.
Cutting Tips to achieve the best performance with the EXTRACTOR™
- Spin the blade in the direction of the arrow stamped and painted on it.
- EXTRACTOR blades are not fragile like abrasive blade. Cut with confidence and some pressure can be applied to increase cut speed.
- Keep the saw RPM high so the blade doesn’t bog down in the cut and try to keep the blade straight and perpendicular to the cut.
- If the blade begins to bog down in the cut quickly raise it a bit from the point. By keeping the saws RPM high generally one does not need to remove the blade completely from the cut to get the blade to spin back up to high RPM.
- When cutting soft materials like aluminum, copper or brass, the diamond edge of the blade may glaze up a little. If this happens, stick the tip of the blade, while spinning at high rpm, into asphalt, concrete block, brick, or the road surface to deglaze it (remove debris and expose the diamonds) for maximum cutting performance.
- Cutting Hurricane Glass & Security glass also use high RPM for fastest cut.
- When finished cutting: "NEVER” STOP THE BLADE’S SPINNING BY STICKING IT INTO SOMETHING TO STOP IT! DOING SO WILL SHORTEN THE LIFE OF THE BLADE.
IMPORTANT: ALWAYS USE SAFETY GLASSES, APPROPRIATE MASK
& PROTECTIVE CLOTHING WHEN CUTTING AND NEVER BREATHE IN THE DUST!!!
We suggest first time users watch the videos to get a feel for how the EXTRACTOR blade can be handle.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
The special discount prices are subject to change without notice. It is always wise to order ASAP and save money.
Fire Rescue Blades, Inc. staff will never sell, trade, share or rent your e-mail address.
|
